Upgrade your wheel hardware with King Performance Forged Titanium Lug Nuts, engineered for high strength, low weight, corrosion resistance, and long-term durability.
Manufactured from forged aerospace-grade Ti6Al-4V titanium alloy, these lug nuts offer an exceptional strength-to-weight ratio while providing outstanding resistance to rust and corrosion.
Each lug nut begins as a hot-forged blank and is fully precision CNC machined. The threads are rolled rather than cut, producing a denser, stronger thread structure with improved toughness and fatigue resistance.
The 33mm design. Precision thread tolerances provide a secure, accurate fit on compatible wheel studs.
Forged aerospace-grade Ti6Al-4V titanium
Lightweight, high-strength construction
Excellent rust and corrosion resistance
Hot-forged and precision CNC machined
Rolled-thread construction for increased strength and fatigue resistance
33mm overall length
19mm hex
Available in open-end and closed-end configurations
Designed for street, performance, and modified vehicles
Material: Forged Ti6Al-4V Aerospace Titanium Alloy
*Black version is PVD coated (Physical Vapor Deposition)*
Mechanical Properties:
Ultimate Tensile Strength: 138,000 psi / 951 MPa
Yield Strength: 128,000 psi / 883 MPa
Overall Length: 33mm
Thread Options:
M14 × 1.5 — 6H precision thread
Individual Lug Nut Weight:
M14 × 1.5 × 33mm Closed-End: 34.2 g
Installation Tool: 19mm socket
Use a properly fitting 19mm socket for installation and removal.
Tighten lug nuts evenly to the appropriate torque specification. Do not over-tighten or use excessive force, as this may damage the threads or lug nut.
Always confirm the correct wheel-stud thread size and torque specification for your specific vehicle and wheel application before installation.
⚠️ WARNING: TITANIUM LUG NUTS
FAILURE TO FOLLOW THESE INSTRUCTIONS CAN LEAVE WHEELS LOOSE, CAUSE COMPONENT FAILURE, OR LEAD TO A LOSS OF VEHICLE CONTROL, RESULTING IN SERIOUS INJURY OR DEATH.
DO NOT USE IMPACT WRENCHES: Tighten and loosen by hand only. Impact tools can gall, strip, or crack titanium threads.
TORQUE TO OEM SPECIFICATIONS: Always use a calibrated torque wrench. Tighten to your vehicle manufacturer’s recommended torque values.
ANTI-SEIZE REQUIRED: Apply a thin layer of high-quality anti-seize lubricant (e.g., copper or nickel-based) to the threads to prevent severe thread galling and seizing.
RE-TORQUE AFTER 50 MILES: Check and re-torque all lug nuts after the first 50 to 100 miles of driving, and after every track event.
Off highway use only.
⚠️ WARNING: California Proposition 65
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, go to www.P65Warnings.ca.govUpgrade your wheel hardware with King Performance Forged Titanium Lug Nuts, engineered for high strength, low weight, corrosion resistance, and long-term durability.
Manufactured from forged aerospace-grade Ti6Al-4V titanium alloy, these lug nuts offer an exceptional strength-to-weight ratio while providing outstanding resistance to rust and corrosion.
Each lug nut begins as a hot-forged blank and is fully precision CNC machined. The threads are rolled rather than cut, producing a denser, stronger thread structure with improved toughness and fatigue resistance.
The 33mm design. Precision thread tolerances provide a secure, accurate fit on compatible wheel studs.
Forged aerospace-grade Ti6Al-4V titanium
Lightweight, high-strength construction
Excellent rust and corrosion resistance
Hot-forged and precision CNC machined
Rolled-thread construction for increased strength and fatigue resistance
33mm overall length
19mm hex
Available in open-end and closed-end configurations
Designed for street, performance, and modified vehicles
Material: Forged Ti6Al-4V Aerospace Titanium Alloy
*Black version is PVD coated (Physical Vapor Deposition)*
Mechanical Properties:
Ultimate Tensile Strength: 138,000 psi / 951 MPa
Yield Strength: 128,000 psi / 883 MPa
Overall Length: 33mm
Thread Options:
M14 × 1.5 — 6H precision thread
Individual Lug Nut Weight:
M14 × 1.5 × 33mm Closed-End: 34.2 g
Installation Tool: 19mm socket
Use a properly fitting 19mm socket for installation and removal.
Tighten lug nuts evenly to the appropriate torque specification. Do not over-tighten or use excessive force, as this may damage the threads or lug nut.
Always confirm the correct wheel-stud thread size and torque specification for your specific vehicle and wheel application before installation.
⚠️ WARNING: TITANIUM LUG NUTS
FAILURE TO FOLLOW THESE INSTRUCTIONS CAN LEAVE WHEELS LOOSE, CAUSE COMPONENT FAILURE, OR LEAD TO A LOSS OF VEHICLE CONTROL, RESULTING IN SERIOUS INJURY OR DEATH.
DO NOT USE IMPACT WRENCHES: Tighten and loosen by hand only. Impact tools can gall, strip, or crack titanium threads.
TORQUE TO OEM SPECIFICATIONS: Always use a calibrated torque wrench. Tighten to your vehicle manufacturer’s recommended torque values.
ANTI-SEIZE REQUIRED: Apply a thin layer of high-quality anti-seize lubricant (e.g., copper or nickel-based) to the threads to prevent severe thread galling and seizing.
RE-TORQUE AFTER 50 MILES: Check and re-torque all lug nuts after the first 50 to 100 miles of driving, and after every track event.
Off highway use only.
⚠️ WARNING: California Proposition 65
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, go to www.P65Warnings.ca.gov